Cable recycling

Buying thin cables: why the price is lower for small cross-sections

Buying thin cables: why the price is lower for small cross-sections

When you sell thin cables for scrap, you get less per kilogram than for thicker installation cables, because a kilogram of thin cable contains less copper and that copper is harder to recover. An H05VV-F 3×0.75 cord contains roughly 34% copper and a two-core JYTY 2×1 about 25%, while CYKY 3×2.5 contains about 47%. In the WIP price list (retrieved on 15 Nov 2026), that is the difference between the groups Cu cables 20 to 30% at €1.00 to €2.00 per kg and the group Cu cables 40% at €3.00 per kg.

What counts as a thin cable when buying scrap

Scrap buyers do not classify cables by standard but by how much metal they can recover. In practice, thin cables are those with a core cross-section of up to about 1 mm² or a conductor diameter of up to 1 mm:

  • flexible cords H03VV-F and H05VV-F (extension leads, appliance cords),
  • low-voltage and communication cables JYTY, SYKFY, SYKY,
  • data cables (UTP, FTP) and telephone cords,
  • control and signal cables with many thin cores,
  • thin wires from distribution boards, doorbell and household wiring.

What they have in common is that every millimetre of copper comes with a relatively large amount of insulation, sheath and sometimes shielding.

Why thin cable has a lower copper share

Insulation and sheath have a minimum thickness required by the standard regardless of the core cross-section. With a 0.5 mm core, the insulation does not shrink in the same proportion as the copper. As a result, plastic makes up a larger share of the weight.

We calculated the copper content from the core cross-section and the density of copper; the cable weight comes from manufacturers' data sheets:

Copper weight [g/m]        = number of cores × core cross-section [mm²] × 8.96
Core cross-section [mm²]   = π × (conductor diameter ÷ 2)²   (for cables designated by diameter)
Copper share [%]           = copper weight [g/m] ÷ cable weight [g/m] × 100
CableCopper (g/m)Cable weight (kg/km)Copper shareWeight source
JYTY 2×114.156approx. 25%CB Elektro catalogue
JYTY 4×128.185approx. 33%CB Elektro catalogue
JYTY 7×149.3128approx. 39%CB Elektro catalogue
SYKFY 2×2×0.57.021approx. 34%CB Elektro catalogue
SYKFY 10×2×0.535.283approx. 42%CB Elektro catalogue
H05VV-F 3G0.7520.260approx. 34%Helukabel
CYKY 3×1.540.397 – 98approx. 41%NKT
CYKY 3×2.567.2141 – 142approx. 47%NKT

The values are approximate; the weights are indicative manufacturer figures and differ between manufacturers. With stranded conductors (H05VV-F), the actual copper is slightly higher than the nominal value; Helukabel states 21.6 kg of copper per km for 3G0.75. SYKFY also has aluminium foil and a drain wire, which are not included in the calculation.

The table shows two things. Thin cables with few cores, such as two-core JYTY, come out worst. Multi-pair cables with dozens of thin cores come close to CYKY 3×1.5 in copper share. What matters is the ratio of metal to plastic, not the cross-section itself.

Why buying thin cables is cheaper even per kilogram of copper

Thin cable is not cheaper only because it contains less copper. Each kilogram of copper inside it is also worth less to the buyer. This is shown by converting the WIP price list to the price per kilogram of contained copper:

Group in the WIP price listPrice per kg of cablePrice per kg of copper in the cable
Cu cables 10%€0.50€5.00
Cu cables 20%€1.00€5.00
Cu cables 30%€2.00approx. €6.67
Cu cables 40%€3.00€7.50
Cu cables 50%€3.50€7.00
price per kg of copper in the cable = price per kg of cable ÷ metal share
Cu cables 20%: €1.00 ÷ 0.20 = €5.00 per kg of copper
Cu cables 40%: €3.00 ÷ 0.40 = €7.50 per kg of copper

The reasons are practical:

  1. Lower yield during processing. Cables are shredded and granulated. Fine copper strands and thin wires separate from the plastic less well than thick cores, and some of the copper stays in the plastic fraction.
  2. More plastic per tonne of metal. For each kilogram of recovered copper, more insulation has to be processed and disposed of.
  3. Admixtures. Thin cables often have tinned conductors, aluminium shielding, steel support wires, or terminals and connectors.
  4. Stripping does not pay off even for the buyer. Stripping thin cores by hand or machine is slow, so they almost always go to granulation.

How price groups work in general is explained in the article Cable buying in Bratislava: how much you get per kilogram. The relationship between the buying price and the exchange is covered in the article Copper price on the exchange (LME) and the buying price.

Not sure which group your thin cables belong to? The price list shows all copper cable groups by metal share.

View the current price list →

Which price group thin cables fall into

Based on the calculated copper share, thin cables are roughly classified as follows (WIP price list as of 15 Nov 2026):

MaterialCopper shareLikely groupPrice per kg
JYTY 2×1, doorbell wire and two-core cordsapprox. 25%Cu cables 20%€1.00
H05VV-F 3G0.75, SYKFY 2×2×0.5, JYTY 4×1approx. 33 – 34%Cu cables 30%€2.00
Multi-pair SYKFY, JYTY 7×1approx. 39 – 42%Cu cables 30 – 40%€2.00 – €3.00
Small cords with plugs, chargerslower, cannot be calculatedCu cables 10 – 20%€0.50 – €1.00

This is our estimate based on the calculation. The actual classification is made by the buyer when inspecting the material, and the cleanliness of the material, terminals and shielding will also play a role. Prices change with the price of copper; current prices are in the WIP price list.

Calculation: is it worth sorting thin cables separately? (illustrative)

After several jobs you have 40 kg of CYKY 3×1.5 and 3×2.5 offcuts and 15 kg of thin cables (JYTY, SYKFY, cords).

Sorted separately:
  CYKY in group Cu cables 40%:    40 kg × €3.00 = €120.00
  thin in group Cu cables 30%:    15 kg × €2.00 =  €30.00
  Total:                                          €150.00

Mixed, if the buyer puts the whole bag in Cu cables 30%:
                                  55 kg × €2.00 = €110.00

The €40 difference arises only because the thin cables pull the thicker offcuts down into a lower group. The calculation is illustrative; how the buyer classifies a mixed batch depends on its composition. The principle holds, though: thin cables never improve the group of thicker ones, they can only make it worse.

How to prepare thin cables for sale

  1. Separate them from CYKY and thicker cables. Put them in a separate bag or box.
  2. Keep multi-pair communication cables separate from two-core cords. They have a higher copper share.
  3. Cut off plugs, connectors and terminals if there are many of them. The brass pins from plugs can be sold separately.
  4. Separate aluminium and steel parts (support wires, aluminium conductors) where possible.
  5. Do not strip them. With 0.5 to 1 mm cores the work does not pay off. More in the article Cable stripping: when it pays off and when it does not.
  6. Do not burn them. Burning cables is prohibited, and burnt copper is bought for less than bright copper.

Do you have a larger amount of low-voltage or communication cables? For larger volumes, a container delivery or collection can be arranged.

Arrange collection →

Common mistakes

  • Mixing thin cables with CYKY. The whole batch may end up in a lower group.
  • Estimating by outer diameter. The thick sheath of JYTY 2×1 (diameter up to 9.2 mm) hides only two cores with a diameter of 1 mm.
  • Stripping thin cores. The time is not recovered and the strands are easily damaged.
  • Expecting a price like for CYKY. A kilogram of thin cable contains less copper and the copper is harder to recover.

Frequently asked questions

Are thin communication cables bought too?

Yes. According to its website, WIP buys all types of cables, including thin communication cables. The price is determined by the metal share; the classification is agreed when the material is inspected.

How much do I get per kilogram of thin cables?

According to the WIP price list as of 15 Nov 2026, roughly €1.00 to €2.00 per kg in the groups Cu cables 20 to 30%. Small cords with plugs may end up in the 10% group at €0.50 per kg, multi-pair communication cables in the 40% group at €3.00 per kg.

How much copper is in a JYTY cable?

JYTY has cores with a diameter of 1 mm, i.e. 0.785 mm² and approximately 7 g of copper per metre per core. JYTY 2×1 has about 14 g of copper per metre, which at a weight of 56 kg/km is approximately 25%.

Is it worth stripping thin cables?

Almost never. With cores of 0.5 to 1 mm in diameter, you get only a few grams of copper per metre, and the work does not pay off even at the price of bright copper.

Are UTP data cables thin cables?

Yes, they have eight cores with a diameter of around 0.5 mm. We will cover buying them in more detail in a separate article for building managers and IT.

Conclusion

Buying thin cables pays less for two reasons. A kilogram of thin cable contains less copper, typically 25 to 35% compared with 40 to 50% for CYKY, and copper from thin conductors is harder to recover during granulation, so even a kilogram of contained copper is worth less. You can influence this by sorting: keep thin cables separate, separate multi-pair cables from two-core cords and do not strip them. More on copper content in installation cables can be found in the article How much copper is in CYKY cable.

Want to know which group your thin cables belong to? We will classify them during inspection at the WIP cable buying point (káblovňa) in Bratislava, phone +421 911 829 999.

Contact the buying point →

Cover photo: Tomasz Sienicki, Wikimedia Commons, licence CC BY 3.0.

Related Articles

Copper electrorefining hall with rows of tanks and cathodes
Cable recycling
LME copper price and scrap buying price: how are they related?
Copper busbars with terminals and connected conductors in a distribution board
Cable recycling
Cu mix, tinned and burnt copper: differences when selling scrap copper
Coils of bright bare copper wire on pallets
Cable recycling
Millberry copper wire: what it is and how to sell it for the best price